United States / Alaska / For sale / music instruments
Post# A217508

EJA118E Differential Pressure Transmitter (3rd floor, 19-6, Tianhu Road, Hefei, China.)

Posted on: Thursday, 09 May, 2019  11:36
Updated On: Thursday, 09 May, 2019  11:39
Expires On: Saturday, 17 August, 2019  18:36
Reply to: ahjianlong@aliyun.com
http://www.ahjianlong.com » DescriptionYokogawa EJA118E Differential Pressure Transmitters is a two remote diaphragm seals type for high temperature fluid differential pressure measurement.I. General IntroductionEJA118E Diaphragm Sealed Differential Pressure Transmitters can be used to measure liquid, gas, or steam flow, as well as liquid level, density, and pressure. It's diaphragm seals are used to prevent process medium form entering directly into the pressure-sensing assembly, connected to the transmitter using capillaries filled with fill fluid, available for fluid with temperature -50 to 310°C.II. Measuring Span & Range limitsMeasurement Span/RangekPainH2O (/D1)mbar (/D3)mmH2O (/D4)MSpan2.5 to 10010 to 40025 to 1000250 to 10000Range-100 to 100-400 to 400-1000 to 1000-10000 to 10000HSpan25 to 500100 to 2000250 to 50000.25 to 5 kgf/cm2Range-500 to 500-2000 to 2000-5000 to 5000-5 to 5 kgf/cm2III. Process temperature, Ambient temperature, and Working pressureLiquid FillCodeProcess temperature*Ambient temperature*Working pressureSilicone oil (general use)A–10 to 250°C (14 to 482°F)–10 to 60°C (14 to 140°F)2.7 kPa abs (0.38 psi abs) to flange rating pressureSilicone oil (general use)B–30 to 180°C (–22 to 356°F)–15 to 60°C (5 to 140°F)Silicone oil (high temperature use)C10 to 310°C (50 to 590°F)10 to 60°C (50 to 140°F)Fluorinated oil (oil-prohibited use)D–20 to 120°C (–4 to 248°F)–10 to 60°C (14 to 140°F)51 kPa abs (7.4 psi abs) to flange rating pressureEthylene glycol (low temperature use)E–50 to 100°C (–58 to 212°F)–40 to 60°C (–40 to 140°F)100 kPa abs (atmospheric pressure) to flange pressure ratingSilicone oil (high temp. and high vacuum use)1–10 to 250°C (14 to 482°F)–10 to 60°C * (14 to 140°F)0.013 kPa abs (0.0019 psi abs) to flange rating pressureSilicone oil (high temp. and high vacuum use)210 to 310°C (50 to 590°F)10 to 60°C (50 to 140°F)Silicone oil (high vacuum use)4–10 to 100°C (14 to 212°F)–10 to 60°C (14 to 140°F)IV. Flange size and ratingProcess connection styleSizeFlangeFlush type3-inch, 2-inch, 11/2-inchJIS 10K, 20K, 40KANSI Class 150, 300, 600JPI Class 150, 300, 600DIN PN10/16, 25/40, 64Extended type4-inch, 3-inchJIS 10K, 20KANSI Class 150, 300JPI Class 150, 300DIN PN10/16, 25/40Combination type (Extended and Flush)High pressure side: 4-inch, Low pressure side: 3-inchJIS 10K, 20KANSI Class 150, 300JPI Class 150, 300DIN PN10/16, 25/40V. Model and suffix codes◆ InstructionThe model and suffix codes for EJA118E consist of two parts; a transmitter body section (I) and a diaphragm seal section (II). This specification sheet introduces these two parts separately. The transmitter body section is shown in one table, and the diaphragm seal section specifications are listed according to the process connection style. First select the model and suffix codes of transmitter body section and then continue on one of the diaphragm seal selection.I. Transmitter body sectionModelSuffix CodesDescriptionEJA118E-------------Diaphragm sealed differential pressure transmitterOutput signal-D-------------4 to 20 mA DC with digital communication (BRAIN protocol)-J-------------4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)-F-------------Digital communication (FOUNDATION Fieldbus protocol)-G-------------Digital communication (PROFIBUS PA protocol)-Q-------------Low Power, 1 to 5 V DC with digital communication (HART 7 protocol)Measurement span (capsule)M-------------2.5 to 100 kPa (10 to 400 inH2O)H-------------25 to 500 kPa (100 to 2000 inH2O)— S-------------Always S— C-------------Always CCoverflange bolts and nuts materialJ-------------G-------------C-------------B7 carbon steel
 316L SST
 660 SSTInstallation-9-------------Horizontal piping type and left side high pressureAmplifier housing1-------------Cast aluminum alloy3-------------Cast aluminum alloy with corrosion resistance properties2-------------ASTM CF-8M stainless steelElectrical connection0--------------G1/2 female, one electrical connection without blind plugs2--------------1/2 NPT female, two electrical connections without blind plugs4--------------M20 female, two electrical connections without blind plugs5--------------G1/2 female, two electrical connections and a blind plug7--------------1/2 NPT female, two electrical connections and a blind plug9--------------M20 female, two electrical connections and a blind plugA-------------G1/2 female, two electrical connections and a 316 SST blind plugC-------------1/2 NPT female, two electrical connections and a 316 SST blind plugD-------------M20 female, two electrical connections and a 316 SST blind plugIntegral indicatorD-------------Digital indicatorE-------------Digital indicator with the range setting switch (push button)N-------------NoneMounting bracketB-------------304 SST 2-inch pipe mounting, flat type (for horizontal piping)J-------------316 SST 2-inch pipe mounting, flat type (for horizontal piping)Diaphragm seal section Continued on diaphragm seal section (II)II. Diaphragm seal section (Flush type)◆ Process connection size: 4-inch (100 mm) / 3-inch (80 mm)ModelSuffix CodesDescriptionEJA118E--------------Transmitter body section (I)Process connection style-W---------------------Flush typeFlange ratingJ1---------------------J2---------------------J4---------------------A1---------------------A2---------------------A4---------------------P1---------------------P2---------------------P4---------------------JIS 10KJIS 20KJIS 40KANSI class 150ANSI class 300ANSI class 600JPI class 150JPI class 300JPI class 600Process connection size (Process flange size)8---------------------1 1/2-inch (40 mm)Flange materialJ---------------------G---------------------C---------------------JIS S25C304 SST316 SSTGasket contact surface-1----------------------2---------------------Serration (for ANSI flange only)Flat (no serration)  Wetted parts materialSW---------------------[Diaphragm]         [Others]  316L SST            316L SSTFlushing connection ring3---------------------4---------------------[Ring]   [Vent/Drain plugs]   [Material]Reducer type  R 1/4 connections   316 SST #Reducer type   1/4 NPT connections   316 SST #Extension0---------------------NoneFill fluid-A----------------------B----------------------D----------------------E----------------------1----------------------4---------------------[Process temperature]   [Ambient temperature]For general use (silicone oil)  –10 to 250°C   –10 to 60°CFor general use (silicone oil)   –30 to 180°C   –15 to 60°CFor oil-prohibited use (fluorinated oil)–20 to 120°C   –10 to 60°CFor low temperature use (ethylene glycol)–50 to 100°C   –40 to 60°CHigh temp. and high vacuum use (Silicone oil)–10 to 250°C   –10 to 50°CHigh vacuum use (Silicone oil)–10 to 100°C   –10 to 50°CCapillary connectionA-----------------Side of diaphragm seal unit— 2---------------Always 2Capillary length1---------------------2---------------------3---------------------4---------------------5---------------------1 m                6 . . . . . . . . . 6 m2 m                7 . . . . . . . . . 7 m3 m                8 . . . . . . . . . 8 m4 m                9 . . . . . . . . . 9 m5 m                A . . . . . . . . . 10 mII. Diaphragm seal section (Extended type)◆ Process connection size: 4-inch (100 mm) / 3-inch (80 mm)ModelSuffix CodesDescriptionEJA118E-----------------Transmitter body section (I)Process connection style-E-----------------Extended typeFlange ratingJ1-----------------J2-----------------A1-----------------A2-----------------P1-----------------P2-----------------D2-----------------D4-----------------JIS 10KJIS 20KANSI class 150ANSI class 300JPI class 150JPI class 300DIN PN10/16DIN PN25/40Process connection size      (Process flange size)4-----------------3-----------------4-inch (100 mm)3-inch (80 mm)Flange materialA----------------- B----------------- C-----------------JIS S25C304 SST316 SSTGasket contact surface-1------------------2-----------------Serration (for ANSI flange only)Flat (no serration)Wetted parts materialSE-----------------[Diaphragm]           [Pipe]           [Others]
   316L SST           316 SST           316 SSTFlushing connection ring0-----------------NoneExtension2-----------------4-----------------6-----------------Length (X2) = 50 mmLength (X2) = 100 mmLength (X2) = 150 mmFill fluid-A------------------B------------------C------------------D------------------E------------------1------------------2------------------4-----------------[Process Temperature ]        [Ambient temperature]For general use (silicone oil)–10 to 250°C    –10 to 60°CFor general use (silicone oil)–30 to 180°C    –15 to 60°CFor high temperature use (silicone oil)10 to 310°C    10 to 60°CFor oil-prohibited use (fluorinated oil)*2–20 to 120°C    –10 to 60°CFor low temperature use (ethylene glycol)–50 to 100°C    –40 to 60°CHigh temp. and high vacuum use (Silicone oil)–10 to 250°C    –10 to 60°C(50°C)High temp. and high vacuum use (Silicone oil)10 to 310°C    10 to 60°C(50°C)High vacuum use (Silicone oil)–10 to 100°C    –10 to 60°C(50°C)Capillary connectionB-----------------Back of diaphragm seal unit— 2-----------------Always 2Capillary length1-----------------2-----------------3-----------------4-----------------5-----------------1 m                6 . . . . . . . . . 6 m2 m                7 . . . . . . . . . 7 m3 m                8 . . . . . . . . . 8 m4 m                9 . . . . . . . . . 9 m5 m                A . . . . . . . . . 10 mII. Diaphragm seal section (Combination type)◆ Process connection size:High pressure side; 4-inch (100 mm) • • • Extended typeLow pressue side; 3-inch (80 mm) • • • Flush typeModelSuffix CodesDescriptionEJA118E--------------Transmitter body section (I)Process connection style-Y----------------------Combination type (Extended and Flush)Flange ratingJ1--------------------J2--------------------A1--------------------A2--------------------P1--------------------P2--------------------D2--------------------D4--------------------JIS 10KJIS


It is ok to contact this poster with commercial interests.


Hosting by a2hosting.com
Smart HR Solution is a complete HRMS Solution developed to cater the HRMS Software requirement of the Middle east region and covers all aspects of HRMS domain. For HR and Payroll Software in UAE Contact 971-4-2989164 or email to info@smartcitysystems.com
when jumping from site to site I have found some tattoo ideas in here that got me thinking again about getting a tattoo sleeve
Jobs is US
africansermonsafaris.com
Benefit from fantastic savings on best adult dating sites , just by taking a look at bristollair.com
If you are not interested in agen judi terpercaya , then you have already missed a lot.
physical therapy certifications cefortherapy
A website like https://www.newarkairportcarservice.us will provide you with the highest quality in the industry.
https://www.blankenshipdrygoods.com/bdg-collection https://www.blankenshipdrygoods.com/bdg-collection https://www.blankenshipdrygoods.com/bdg-collection
For additional local awning visit edgesigns.
Russian bookstore is located in the USA. Colibri bookstore suggests you a rich collection of russian books and russian gifts. Our store sells Russian children's literature of different ages. The bookstore Colibri offers a wide choice of Russian books for babies. Children's books in Russian help to learn Russian easily.